Hayward Pool Filters
Nonstop Swim carries the full Hayward residential pool filter lineup across all three filtration technologies: sand, cartridge, and D.E. All models are sold as authorized Hayward dealer stock. Select a filter type below to browse the full lineup with specs and pricing.
Skip to Hayward Pool Filter CollectionsHayward Pool Filter Types: Sand, Cartridge, and D.E.
Sand filters trap debris in a bed of #20 silica sand and clean through backwashing. They filter to 20-40 microns, require no media replacement for 3-5 years, and have the lowest ongoing cost of any filter type. The right choice for pool owners who want simple, low-maintenance filtration.
Cartridge filters use a pleated polyester element to capture particles to 10-15 microns without backwashing or a multiport valve. Cleaning is done by removing and rinsing the cartridge with a garden hose. No water is wasted during routine maintenance, and the simpler plumbing makes them a natural fit for pools where a backwash drain line is impractical.
D.E. filters provide the finest residential pool filtration available, capturing particles down to 2 microns using diatomaceous earth powder as the filter media. The Hayward Perflex line uses a patented Flex-Tube design that cleans without backwashing through a bump handle, reusing the D.E. charge rather than flushing it. D.E. filtration is the choice when water clarity is the top priority.
Hayward ProSeries Sand Filters
15 models for above-ground and in-ground pools. 16-inch to 30-inch tanks, filter-only and pump system configurations. The most widely installed sand filter line in residential pool filtration.
Hayward StarClear Cartridge Filters
Single-element cartridge filters for above-ground pools, smaller in-ground pools, and spas. 50 sq ft (W3C500) and 120 sq ft (W3C12002) models. No backwash valve required.
Hayward SwimClear Cartridge Filters
High-capacity cartridge filters for larger in-ground pools. Single-element and four-element models from 150 sq ft to 525 sq ft. Industry-leading low head loss and EasyLok ring access.
Hayward ProGrid D.E. Filters
Vertical grid D.E. filters for in-ground pools. 36, 48, and 60 sq ft models. 5-micron filtration, one-piece flange clamp access, NSF/ANSI/CAN 50 certified. No backwash valve included; compatible valves sold separately.
Hayward Perflex D.E. Filters
Extended-cycle D.E. filters with patented Flex-Tube bump-to-clean design. 2-micron filtration without backwashing or grid teardown. In-ground (27 and 40 sq ft) and above-ground (20 and 25 sq ft) models, including pump system bundles.
Nonstop Swim carries the full Hayward residential pool filter lineup across all three filtration technologies: sand, cartridge, and D.E. All models are sold as authorized Hayward dealer stock. Select a filter type below to browse the full lineup with specs and pricing.
Skip to Hayward Pool Filter CollectionsHayward Pool Filter Types: Sand, Cartridge, and D.E.
Sand filters trap debris in a bed of #20 silica sand and clean through backwashing. They filter to 20-40 microns, require no media replacement for 3-5 years, and have the lowest ongoing cost of any filter type. The right choice for pool owners who want simple, low-maintenance filtration.
Cartridge filters use a pleated polyester element to capture particles to 10-15 microns without backwashing or a multiport valve. Cleaning is done by removing and rinsing the cartridge with a garden hose. No water is wasted during routine maintenance, and the simpler plumbing makes them a natural fit for pools where a backwash drain line is impractical.
D.E. filters provide the finest residential pool filtration available, capturing particles down to 2 microns using diatomaceous earth powder as the filter media. The Hayward Perflex line uses a patented Flex-Tube design that cleans without backwashing through a bump handle, reusing the D.E. charge rather than flushing it. D.E. filtration is the choice when water clarity is the top priority.
Hayward ProSeries Sand Filters
15 models for above-ground and in-ground pools. 16-inch to 30-inch tanks, filter-only and pump system configurations. The most widely installed sand filter line in residential pool filtration.
Hayward StarClear Cartridge Filters
Single-element cartridge filters for above-ground pools, smaller in-ground pools, and spas. 50 sq ft (W3C500) and 120 sq ft (W3C12002) models. No backwash valve required.
Hayward SwimClear Cartridge Filters
High-capacity cartridge filters for larger in-ground pools. Single-element and four-element models from 150 sq ft to 525 sq ft. Industry-leading low head loss and EasyLok ring access.
Hayward ProGrid D.E. Filters
Vertical grid D.E. filters for in-ground pools. 36, 48, and 60 sq ft models. 5-micron filtration, one-piece flange clamp access, NSF/ANSI/CAN 50 certified. No backwash valve included; compatible valves sold separately.
Hayward Perflex D.E. Filters
Extended-cycle D.E. filters with patented Flex-Tube bump-to-clean design. 2-micron filtration without backwashing or grid teardown. In-ground (27 and 40 sq ft) and above-ground (20 and 25 sq ft) models, including pump system bundles.
-
$1,109.00 -
Save $-1,189.00
$1,189.00| / -
Save $-569.00
$569.00| / -
Save $-729.00
$729.00| / -
Save $-1,149.00
Hayward Hayward Perflex Extended-Cycle D.E. Inground Pool Filter 6 lb • Up to 15,000 gallons$1,149.00| /$1,149.00| / -
Save $-1,239.00
$1,239.00| / -
Save $-1,389.00
$1,389.00| / -
Save $-1,559.00
$1,559.00| / -
Save $-1,709.00
$1,709.00| / -
Save $-429.00
$429.00| / -
Save $-499.00
$499.00| / -
Save $-899.00
$899.00| / -
Save $-569.00
$569.00| / -
Save $-669.00
$669.00| / -
Save $-689.00
$689.00| / -
Save $-759.00
$759.00| / -
Save $-739.00
$739.00| / -
Save $-819.00
$819.00| / -
Save $-1,429.00
$1,429.00| / -
Save $-1,219.00
$1,219.00| / -
Save $-739.00
$739.00| / -
Save $-839.00
$839.00| / -
Save $-859.00
$859.00| / -
Save $-919.00
$919.00| /