Hayward Perflex Filters
The Hayward Perflex is an extended-cycle D.E. filter that cleans without backwashing. The patented Flex-Tube design reuses D.E. powder through a bump handle rather than flushing it, eliminating the need for a backwash valve, drain line, or grid teardown. Filtration is to 2 microns — finer than sand or cartridge filters. All models include a self-venting design and integral check valve. D.E. powder is not included with any model.
Skip to Perflex D.E. Filter ProductsHow the Perflex Bump-to-Clean Cycle Works
When operating pressure rises 10 to 12 PSI above the clean baseline, stop the pump, push the bump handle down slowly then up briskly, and repeat 8 times. The Flex-Tubes compress and release, shedding the D.E. cake and redistributing it as a fresh coating. Restart the pump. No water is discharged, no fresh D.E. is needed in most cases, and no valve or drain line is required. A full D.E. recharge is only needed when bumping and draining no longer restore acceptable pressure — typically one to three times per season.
Choosing the Right Perflex Model
Select by pool application first (in-ground vs. above-ground), then by filter area and flow rate to match your pump's output at actual system head. The pump system bundles (W3EC40C92S and W3EC50C93S) include a factory-matched above-ground pump and are sized for above-ground pool plumbing only.
In-Ground Perflex D.E. Filters
Both in-ground models are filter-only and suited to in-ground pool pump configurations.
| Product | Filter Area | D.E. Charge | Flow Rate |
|---|---|---|---|
| Hayward PerFlex Extended-Cycle D.E. Filter 27 Sq Ft | 27 sq ft | 6 lbs | 67 GPM |
| Hayward PerFlex Extended-Cycle D.E. Filter 40 Sq Ft | 40 sq ft | 7 lbs | 80 GPM |
Above-Ground Perflex D.E. Filters
Four models for above-ground pools: two filter-only with clamp assembly, and two pre-matched pump systems.
| Product | Filter Area | D.E. Charge | Flow Rate | Pump |
|---|---|---|---|---|
| Hayward Perflex D.E. Filter with Clamp 4 lb | 20 sq ft | 4 lbs | 40 GPM | Filter only |
| Hayward Perflex D.E. Filter System 4 lb 1 HP Pump | 20 sq ft | 4 lbs | 40 GPM | 1 HP PowerFlo Matrix |
| Hayward Perflex D.E. Filter with Clamp 5 lb | 25 sq ft | 5 lbs | 50 GPM | Filter only |
| Hayward Perflex D.E. Filter System 5 lb 1.5 HP Pump | 25 sq ft | 5 lbs | 50 GPM | 1.5 HP PowerFlo Matrix |
Flow rates per Hayward published specifications. D.E. powder not included with any model. Pump system models are for above-ground pool applications only.
The Hayward Perflex is an extended-cycle D.E. filter that cleans without backwashing. The patented Flex-Tube design reuses D.E. powder through a bump handle rather than flushing it, eliminating the need for a backwash valve, drain line, or grid teardown. Filtration is to 2 microns — finer than sand or cartridge filters. All models include a self-venting design and integral check valve. D.E. powder is not included with any model.
Skip to Perflex D.E. Filter ProductsHow the Perflex Bump-to-Clean Cycle Works
When operating pressure rises 10 to 12 PSI above the clean baseline, stop the pump, push the bump handle down slowly then up briskly, and repeat 8 times. The Flex-Tubes compress and release, shedding the D.E. cake and redistributing it as a fresh coating. Restart the pump. No water is discharged, no fresh D.E. is needed in most cases, and no valve or drain line is required. A full D.E. recharge is only needed when bumping and draining no longer restore acceptable pressure — typically one to three times per season.
Choosing the Right Perflex Model
Select by pool application first (in-ground vs. above-ground), then by filter area and flow rate to match your pump's output at actual system head. The pump system bundles (W3EC40C92S and W3EC50C93S) include a factory-matched above-ground pump and are sized for above-ground pool plumbing only.
In-Ground Perflex D.E. Filters
Both in-ground models are filter-only and suited to in-ground pool pump configurations.
| Product | Filter Area | D.E. Charge | Flow Rate |
|---|---|---|---|
| Hayward PerFlex Extended-Cycle D.E. Filter 27 Sq Ft | 27 sq ft | 6 lbs | 67 GPM |
| Hayward PerFlex Extended-Cycle D.E. Filter 40 Sq Ft | 40 sq ft | 7 lbs | 80 GPM |
Above-Ground Perflex D.E. Filters
Four models for above-ground pools: two filter-only with clamp assembly, and two pre-matched pump systems.
| Product | Filter Area | D.E. Charge | Flow Rate | Pump |
|---|---|---|---|---|
| Hayward Perflex D.E. Filter with Clamp 4 lb | 20 sq ft | 4 lbs | 40 GPM | Filter only |
| Hayward Perflex D.E. Filter System 4 lb 1 HP Pump | 20 sq ft | 4 lbs | 40 GPM | 1 HP PowerFlo Matrix |
| Hayward Perflex D.E. Filter with Clamp 5 lb | 25 sq ft | 5 lbs | 50 GPM | Filter only |
| Hayward Perflex D.E. Filter System 5 lb 1.5 HP Pump | 25 sq ft | 5 lbs | 50 GPM | 1.5 HP PowerFlo Matrix |
Flow rates per Hayward published specifications. D.E. powder not included with any model. Pump system models are for above-ground pool applications only.
-
$1,109.00 -
Save $-1,189.00
$1,189.00| / -
Save $-569.00
$569.00| / -
Save $-729.00
$729.00| / -
Save $-1,149.00
Hayward Hayward Perflex Extended-Cycle D.E. Inground Pool Filter 6 lb • Up to 15,000 gallons$1,149.00| /$1,149.00| / -
Save $-1,239.00
$1,239.00| /