Hayward ColorLogic 320 Pool Light 1.5 Inch LED 100 Ft
✓ Hayward Authorized Dealer
✓ Includes Manufacturer Warranty
✓ Installation Available Upon Request
✓ 30-Day Return Policy Guarantee
The Hayward ColorLogic 320 (W3LACUS11100) is a 1.5-inch nicheless 12V LED accent light with a 100-foot cord. Delivers 10 fixed colors and 7 color-changing shows. Installs into a standard 1.5-inch return fitting at just 4 inches below waterline, in as little as 8 inches of PVC conduit. Ideal for steps, bubblers, baja shelves, jets, and water features.
- SKU: W3LACUS11100
- 1-year limited warranty (parts); proof of installation by a certified technician required to validate warranty
- 10 fixed colors and 7 color-changing shows
- Synchronizes completely with Universal ColorLogic pool lights and shows
- Nicheless design: installs into standard 1.5-inch return fitting (no traditional niche required)
- Installs at just 4 inches below waterline; requires as little as 8 inches of PVC conduit
- Can be installed wet or dry; suitable for pool, spa, and landscape applications
- 100-foot cord for extended conduit runs; measure routed conduit distance before ordering
- Plastic faceplate; high-lumen output
- Ideal for steps, jets, bubblers, baja shelves, fountains, and water features
- Lasts up to 10x longer than incandescent accent lights
- Dedicated GFCI-protected 12V circuit with step-down transformer required; licensed electrician installation per NEC Article 680
Hayward ColorLogic 320 LED Accent Pool Light: 10 Fixed Colors, 7 Shows, and Universal ColorLogic Synchronization
The ColorLogic 320 is a nicheless 1.5-inch LED accent light that installs directly into a standard return fitting in the pool or spa wall, with no traditional niche required. It needs as little as 8 inches of PVC conduit behind the wall and sits just 4 inches below the waterline, making it one of the easiest 1.5-inch lights to retrofit into an existing pool. The 100-foot cord version handles installations where the conduit route from the fitting to the junction box exceeds what a 50-foot cord can reach. Any excess cord stores in the conduit or behind the fitting with no effect on performance.
ColorLogic 320 100-Foot vs. 50-Foot Cord: Choosing the Right Length
The cord cannot be spliced or extended after installation without violating NEC requirements. Measure the routed conduit distance from the fitting to the junction box, not a straight-line estimate, before ordering. If that measured run is 50 feet or less, the 50-foot version is appropriate. If it exceeds 50 feet, or if the exact length is uncertain and you want to eliminate installation-day risk, the 100-foot version is the right choice. Excess cord coils inside the conduit or behind the fitting permanently with no operational consequence.
Hayward ColorLogic 320 LED Accent Light 12V 100-Foot Cord Specifications
Hayward ColorLogic 320 LED Accent Light Frequently Asked Questions
Does the ColorLogic 320 require a traditional pool light niche?
No. The ColorLogic 320 is a nicheless fixture that installs into a standard 1.5-inch return fitting in the pool wall. No traditional niche is needed. It requires as little as 8 inches of PVC conduit behind the wall and sits at just 4 inches below the waterline, making it straightforward to retrofit into pools that were not originally built with accent light niches.
The original copy listed 16 colors. Is that correct?
No. The ColorLogic 320 delivers 10 fixed colors and 7 color-changing shows. It synchronizes with Universal ColorLogic pool lights to coordinate colors and shows across all fixtures on the same zone.
Does the ColorLogic 320 synchronize with the ColorLogic 4.0 main pool light?
The ColorLogic 320 is designed to synchronize with Universal ColorLogic pool lights. Compatibility with older ColorLogic 4.0 fixtures depends on the specific control system in use. Confirm fixture-to-fixture compatibility with Hayward or the installing electrician if you have a ColorLogic 4.0 main pool light and want synchronized operation.
Can I use the 100-foot cord version if my conduit run is only 30 feet?
Yes. The excess cord coils in the conduit or behind the fitting permanently. The fixture operates identically regardless of how much cord is stored. If the niche or conduit space behind the fitting is unusually limited, confirm with the installing electrician that the excess cord can be accommodated.
Does warranty require professional installation?
Yes. Proof of installation by a certified technician is required to validate the factory warranty. Licensed electrician installation is also required under NEC Article 680 for pool and spa electrical work.