{"product_id":"raypak-natural-gas-pool-heater-150k-btu-156a-014784","title":"Raypak Natural Gas Pool Heater 150K BTU 156A 014784","description":"\u003c!-- more --\u003e\n\n\u003cp\u003eThe Raypak 156A (014784, P-R156A-EN-C) is a 150,000 BTU natural gas pool heater for above-ground and in-ground pools at elevations from sea level to 4,999 feet. It uses Raypak's AFT digital controls, a copper fin-tube heat exchanger, polymer headers, and a PolyTuf powder-coated galvanized steel cabinet. This is the natural gas version rated for 0–4,999 ft.\u003c\/p\u003e\n\n\u003cp\u003eGas heater sizing reflects recovery speed — how fast the heater raises pool temperature from cold — not steady-state energy demand. Cooler climates, shaded pools, or pools without a solar cover should size conservatively.\u003c\/p\u003e\n\n\u003ch2\u003eRaypak 156A 014784 - Pool Size by Climate\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ccaption\u003eRaypak 156A 014784 - Pool Size Estimate by Climate\u003c\/caption\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"col\"\u003eClimate\u003c\/th\u003e\n      \u003cth scope=\"col\"\u003eRecommended Pool Size\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWarm climate (moderate heat loss)\u003c\/td\u003e\n      \u003ctd\u003eUp to 10,000 gallons\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCooler climate or high heat-loss pool\u003c\/td\u003e\n      \u003ctd\u003e6,000–8,000 gallons\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003e\u003cem\u003eThese figures reflect heat-up speed from a cold pool, not steady-state maintenance load. Above-ground and in-ground pools both supported. A solar cover significantly reduces heat loss and fuel use.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch2\u003eRaypak 156A 014784 - Key Features\u003c\/h2\u003e\n\n\u003cp\u003eThe 156A uses Raypak's AFT digital control board with a microprocessor thermostat, LCD display, plain-text self-diagnostics, flame strength indicator, and run-time and cycle meter. Ignition is intermittent spark-to-pilot: the pilot fires only when the thermostat calls for heat, conserving gas between cycles.\u003c\/p\u003e\n\n\u003cp\u003eThe copper integral-fin-tube heat exchanger uses single-piece extruded copper construction with stainless steel tube sheets. Polymer (Capron resin) headers prevent rust staining on pool surfaces. The Unitherm Governor keeps inlet water above 105°F to prevent condensation and scale. An automatic internal bypass valve manages flow across varying pump speeds. The ProTek Shield module provides replaceable sacrificial corrosion protection at the exchanger inlet.\u003c\/p\u003e\n\n\u003cp\u003eThe low-profile pagoda-top cabinet drafts naturally without a fan. The unit ships factory test-fired with a 3-foot, 3-prong 120V power cord.\u003c\/p\u003e\n\n\u003ch2\u003eRaypak 156A 014784 - Full Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ccaption\u003eRaypak 156A Natural Gas Pool Heater 014784 — Complete Technical Specifications (P-R156A-EN-C)\u003c\/caption\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"col\"\u003eSpecification\u003c\/th\u003e\n      \u003cth scope=\"col\"\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eModel Number\u003c\/td\u003e\n\u003ctd\u003eP-R156A-EN-C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePart \/ SKU\u003c\/td\u003e\n\u003ctd\u003e014784\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBTU Input Rate\u003c\/td\u003e\n\u003ctd\u003e150,000 BTU\/hr (43.93 kW)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eThermal Efficiency\u003c\/td\u003e\n\u003ctd\u003e82%\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eFuel Type\u003c\/td\u003e\n\u003ctd\u003eNatural Gas\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eElevation Rating\u003c\/td\u003e\n\u003ctd\u003e0 to 4,999 ft above sea level\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMin. Gas Supply Pressure\u003c\/td\u003e\n\u003ctd\u003e3.5\" W.C. at heater inlet\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eGas Connection\u003c\/td\u003e\n\u003ctd\u003e1\/2\" NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eIgnition\u003c\/td\u003e\n\u003ctd\u003eElectronic spark-to-pilot, intermittent with flame supervision\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eControls\u003c\/td\u003e\n\u003ctd\u003eRaypak AFT Digital — LCD display, self-diagnostics, flame strength indicator, run-time and cycle meter\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e120 VAC (field-convertible to 240 VAC), single-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBreaker\u003c\/td\u003e\n\u003ctd\u003e15 amp dedicated circuit\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eElectrical Connection\u003c\/td\u003e\n\u003ctd\u003e3-ft., 3-prong 120V power cord (field-convertible to 240V)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHeat Exchanger\u003c\/td\u003e\n\u003ctd\u003eIntegral copper fin-tube with stainless steel tube sheets\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHeader Material\u003c\/td\u003e\n\u003ctd\u003ePolymer (Capron resin) — rust-stain free\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBurner\u003c\/td\u003e\n\u003ctd\u003eStainless steel hybrid, self-adjusting\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProTek Shield\u003c\/td\u003e\n\u003ctd\u003eIncluded (replaceable sacrificial corrosion protection)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMax Water Flow\u003c\/td\u003e\n\u003ctd\u003e70 GPM\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePlumbing Connection\u003c\/td\u003e\n\u003ctd\u003e2\" NPT flanges (included)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompatible Pool Types\u003c\/td\u003e\n\u003ctd\u003eAbove-ground and in-ground; chlorinated and salt water\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePool Size Estimate\u003c\/td\u003e\n\u003ctd\u003eUp to ~10,000 gal (warm climate); 6,000–8,000 gal (cooler climates)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eVenting\u003c\/td\u003e\n\u003ctd\u003eCategory I atmospheric; outdoor stackless top included; indoor drafthood required separately\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRemote Control\u003c\/td\u003e\n\u003ctd\u003e2-wire or 3-wire; compatible with most major pool automation systems\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWater Chemistry\u003c\/td\u003e\n\u003ctd\u003eFree chlorine max 5 ppm; pH 7.2–7.8; salt max 4,500 ppm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eShipping Weight\u003c\/td\u003e\n\u003ctd\u003e100 lbs (45.4 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eLow NOx\u003c\/td\u003e\n\u003ctd\u003eNot Low NOx rated — cannot be sold in SCAQMD counties (SoCal) or Utah\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd\u003eANSI Z21.56 \/ CSA 4.7\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRaypak 156A 014784 - Warranty\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ccaption\u003eRaypak 156A 014784 Warranty Terms — Professional Installation Required\u003c\/caption\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"col\"\u003eCoverage\u003c\/th\u003e\n      \u003cth scope=\"col\"\u003eTerm\u003c\/th\u003e\n      \u003cth scope=\"col\"\u003eConditions\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eParts — Standard Residential\u003c\/td\u003e\n      \u003ctd\u003e2 years\u003c\/td\u003e\n      \u003ctd\u003eRegistered with installation receipt at raypak.com\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eParts — New Construction (Builder)\u003c\/td\u003e\n      \u003ctd\u003e3 years\u003c\/td\u003e\n      \u003ctd\u003eRegistered within 90 days of installation with receipt\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eParts — Without Registration\u003c\/td\u003e\n      \u003ctd\u003e1 year\u003c\/td\u003e\n      \u003ctd\u003eNo registration or missing receipt\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eLabor\u003c\/td\u003e\n      \u003ctd\u003eNot covered\u003c\/td\u003e\n      \u003ctd\u003eResidential labor is owner's responsibility\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eInstallation Requirement\u003c\/td\u003e\n      \u003ctd\u003eRequired\u003c\/td\u003e\n      \u003ctd\u003eMust be installed by a licensed contractor per all local codes\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003e\u003cem\u003eExclusions: water chemistry damage, freeze damage, and sprinkler\/water contact with cabinet. Register at raypak.com immediately after installation.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch2\u003eRaypak 156A 014784 - Installation Documents\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/s3.amazonaws.com\/AWSProd\/sites\/raypakcom\/documents\/241519.pdf\" target=\"_blank\" rel=\"noopener\"\u003eRaypak 156A Pool Heater — Installation and Operation Manual (P\/N 241519)\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/s3.amazonaws.com\/AWSProd\/sites\/raypakcom\/documents\/100-10000378.pdf\" target=\"_blank\" rel=\"noopener\"\u003eRaypak 156A Pool Heater — Limited Warranty (100-10000378)\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/s3.amazonaws.com\/AWSProd\/sites\/raypakcom\/documents\/6100.30.pdf\" target=\"_blank\" rel=\"noopener\"\u003eRaypak 156A Pool Heater — Product Brochure (6100.30)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions - Raypak 156A Natural Gas Pool Heater 014784\u003c\/h2\u003e\n\n\u003cdetails\u003e\n  \u003csummary\u003eWhat pool size is the Raypak 156A 014784 designed for?\u003c\/summary\u003e\n  \u003cp\u003eIn warm climates, up to approximately 10,000 gallons. In cooler climates or pools with high evaporation, shade, or wind exposure, size down to 6,000 to 8,000 gallons for comfortable recovery times. Compatible with both above-ground and in-ground pools and spas.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n  \u003csummary\u003eWhat are the electrical requirements?\u003c\/summary\u003e\n  \u003cp\u003eThe 014784 ships factory-wired for 120 VAC with a 3-foot, 3-prong cord on a dedicated 15-amp circuit. The internal transformer can be field-rewired to 240V without additional parts. All electrical work must be performed by a licensed electrician per local code.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n  \u003csummary\u003eIs this a heat-only model?\u003c\/summary\u003e\n  \u003cp\u003eYes. The 156A cannot cool pool water. Gas heaters excel at fast, on-demand heating regardless of ambient air temperature. If cooling is also needed, a heat pump with an integrated cooling mode is the appropriate addition.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n  \u003csummary\u003eHow does the natural gas 014784 compare to the propane 014786?\u003c\/summary\u003e\n  \u003cp\u003eBoth deliver 150,000 BTU\/hr at 82% efficiency with identical AFT controls, copper heat exchanger, and warranty terms. The natural gas 014784 is rated for 0 to 4,999 ft; the propane 014786 is rated for 0 to 1,999 ft only. Natural gas connects directly to a gas line; propane requires a stationary tank, two-stage regulator, and licensed gas contractor. Choose based on which fuel is available at your site.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n  \u003csummary\u003eHow does the 156A compare to the R206A (009216)?\u003c\/summary\u003e\n  \u003cp\u003eThe 156A produces 150,000 BTU\/hr and suits pools up to 10,000 gallons. The R206A (009216) produces 199,500 BTU\/hr — roughly 33% more output — and suits pools up to 20,000 to 25,000 gallons. They are different cabinet platforms. If your pool is above 10,000 gallons, the R206A is the right step up.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n  \u003csummary\u003eWhat are the warranty terms?\u003c\/summary\u003e\n  \u003cp\u003eProfessional installation by a licensed contractor is required. Standard residential with registration and receipt: 2 years parts. New construction registered within 90 days with receipt: 3 years parts. Without registration: 1 year. Labor is not covered under residential warranty. Register at raypak.com immediately after installation.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Raypak","offers":[{"title":"Default Title","offer_id":48536290656473,"sku":"014784","price":2749.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0683\/3592\/7513\/files\/Raypak-156A-Digital-Electronic-Natural-Gas-Pool-Gas-Heater.jpg?v=1776282288","url":"https:\/\/nonstopswim.com\/products\/raypak-natural-gas-pool-heater-150k-btu-156a-014784","provider":"Nonstop Swim","version":"1.0","type":"link"}